Optimal design of two-dimensional wings in ground effect using multi-objective genetic algorithm     

Kyoungwoo Park  Juhee Lee 《Ocean Engineering》2010,37(10):902-912

The shape optimization of the 2-dimensional wing in ground effect (WIG) has been performed by the integration of CFD (computational fluid dynamics) and MOGA (multi-objective genetic algorithm). Because of the trade-off between the aerodynamic forces and the height stability, it is difficult to satisfy the design requirements of efficiency and stability at the same time. In this study, the lift coefficient, the lift-drag ratio and the static height stability are chosen as the objective functions to obtain the optimal wing profiles of a WIG craft. An NACA0015 airfoil is used for the baseline model; the aerodynamic characteristics of the base model are compared with that of the optimal solutions. The profile of the airfoil is constructed by four Bezier curves with fourteen control points resulting in the eighteen coordinates, which are adopted as the design variables. The optimal solutions of the multi-objective optimization are not unique but a set of the non-dominated optima: the Pareto frontiers or a Pareto set. As the results of the multi-objective optimization, the forty Pareto optima, which include high-lift, high-efficiency, and more stable airfoils on the edge of the 3-dimensional objective space, are obtained at thirty evolutions of the generation.  相似文献   

Study of Partial Coefficients for Design of Semicircular Breakwaters     

郄禄文  Byung  Ho  CHOI 《中国海洋工程》2010,24(1):29-40

In the present study,the reliability design of semicircular breakwater is based on the verification of the rules defined by standard specifications,where partial coefficients are introduced to ensure safety.The reliability of the semicircular breakwaters has been analyzed by using the Hasofer-Lind method to determine the reliability index of structure that has correlated loads,utilizing the long-term observed wave data at a given place.The relation curve between reliability index and safety factor in the traditional design method,as well as the relationships between reliability index and partial coefficients,have been obtained.This paper proposes values of partial coefficients for the design expression of semicircular breakwaters in the cases of anti-sliding and anti-overturning.  相似文献   

利用相关逼近法建立定位与姿态数据的同步模型          下载免费PDF全文

齐珺  暴景阳  周丰年  崔扬  冯金涛 《海洋测绘》2010,30(2):28-31

根据海道测量精密测量的需求,对姿态与定位数据融合的同步方法进行了研究。通过GPS大地高数据和升沉数据,建立了一种基于相关逼近原理的定位与姿态数据同步模型。该模型能够确定定位与姿态数据的相对延时,实现两类数据在同一时间基准下的同步。实例计算表明,定位与姿态数据的相对延迟时间已成为两类数据融合应用中必须考虑的因素。由同步模型解算后,GPS大地高数据与总升沉数据体现了更好的一致性,由此也验证了模型的有效性。  相似文献   

Analysis of Manning coefficient for small‐depth flows on vegetated beds     

R. García Díaz 《水文研究》2005,19(16):3221-3233

The limitations of Manning's formula are analysed when it is in extreme conditions, and more specifically with small‐depth flows on natural‐vegetation beds. A thorough analysis is made of research carried out on macro‐rough beds, placing particular emphasis on vegetated beds. Research carried out to date on the roughness of vegetated beds and macro‐roughness is commented on, including that carried out at the Laboratory of Hydraulics and Hydrology of the Forestry Engineering Faculty (Polytechnic University of Madrid). The work was done in two phases, the first in a laboratory channel with artificial vegetation and the second in natural beds. The results of the experimental research allow the development of a new approximate method of determining Manning coefficient according to the Froude number. This method may be applied in extreme conditions, both in small depths and steep slopes. It was proved that the Manning coefficient depends not only on roughness height, but also on depth and slope values; thus, it is advisable to choose the appropriate method for its calculation. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

煤田火区碳排放量计算模型和关键参数研究     

曹代勇  刘志飞  杨光  杜晓敏  豆旭谦  宋现锋  王海燕 《地学前缘》2018,25(1):252-258

完善碳排放清单,是进行减排工作的基础,为了查明煤田火区对大气碳排放的贡献量,以煤氧复合作用学说为理论基础,从不同的研究思路出发,提出了烧失煤量法和排放通量法两种火区碳排放量计算模型。在明确模型中关键参数“释放因子”“排放系数α”“排放通量”“排放系数β”的具体含义的基础上,重点对各参数所对应的获取途径进行了研究论述：(1)释放因子通过在室内进行煤自燃模拟实验得出;(2)排放系数α通过煤岩吸附实验结合火区实地勘测得出;(3)排放通量通过对火区现场煤自燃气体排放及环境因素的实时监测得出;(4)排放系数β通过对遥感图像裂隙信息的提取得到。上述两种计算模型在我国乌达实验区进行了实际应用,并对其可实现性进行了检验。  相似文献   

考虑结构性的冻融作用对黄土湿陷系数的影响     

丑亚玲  郏书胜  张庆海  曹伟  盛煜 《岩土力学》2018,39(8):2715-2722

结构性是黄土的基本属性,黄土的湿陷特性与其结构性之间有着必然的联系。针对冻融作用对不同结构性黄土湿陷性的影响,以水泥作为模拟土颗粒间的联结材料制备了人工结构性土,开展了不同水泥含量的人工结构性土与相应的原状土、重塑土的湿陷试验,分析了结构性、冻融作用、初始含水率、湿重度及荷载大小对湿陷系数的影响规律。试验结果表明：冻融前后,人工结构性黄土的湿陷系数均比原状土、重塑土的湿陷系数小,且随着水泥含量的增加,湿陷系数有所减小;冻融之后,各土样的湿陷系数几乎均有所增加,但增加的程度和土样初始结构、含水率、干密度（压实系数）及竖向荷载关系密切,尤其当含水率接近最优含水率和土样为重塑土或水泥含量较低的人工结构性土时,冻融后湿陷系数增大幅度显著。在标准荷载200 kPa下,冻融前后原状土、重塑土的湿陷系数与其湿重度之间基本呈较好的线性负相关关系,而人工结构性黄土湿陷系数与湿重度之间并不呈线性关系;竖向荷载为50 kPa时,重塑黄土和5%水泥含量黄土的湿陷系数与冻融次数之间存在着较好的对数关系。以水泥作为土颗粒间联结材料,制备的人工结构性土是否能很好地代替原状土反映结构性黄土的湿陷特性,还需更进一步深入研究。  相似文献   

西安白鹿塬北缘黄土边坡稳定的可靠度分析   总被引：4，自引：1，他引：3  

王阿丹  王昌业  李萍  李同录 《地球科学与环境学报》2012,(1):104-110

在西安白鹿塬北缘实测了14个黄土自然边坡断面,建立了地质模型,通过采样测试并收集已有的测试资料,获得了各时代黄土地层的物理力学参数,将Morgenstern-Price法稳定性计算公式作为极限状态方程,分别采用Monte-Carlo法和Duncan法进行了边坡稳定的可靠度分析。结果表明:采用Monte-Carlo法和Duncan法得到的14个边坡稳定系数分别为1.11～1.41和1.09～1.33,显示这些边坡处于基本稳定—稳定状态;采用上述两种方法得到的边坡可靠指标分别为0.56～1.79和0.39～1.60,得到的失效概率分别为3.4%～29.0%和5.5%～34.8%,并且共有75%的边坡失效概率大于10%,失效可能性较大。统计结果表明:白鹿塬区边坡的坡高和坡度存在负相关性。低而陡的边坡潜在最危险滑面剪出口较高,失效概率较小;坡高达到50m及以上时,边坡高而缓,剪出口较低,失效概率较大,其中河流下切深,有N2泥岩出露的极高边坡,稳定性最差。Duncan法求解的稳定系数略小于Monte-Carlo法求得的结果,而前者求解的失效概率略大于后者,两种方法计算结果较为接近。由于Duncan法理论简单,计算量小,更宜于在实际工程中应用。  相似文献   

基于OpenSees的RCS组合框架结构抗震性能模拟分析     

门进杰  胡俊  王秋维  郭智峰 《地震学刊》2014,(5):649-655

选取已有钢筋混凝土柱—钢梁组合结构（RCS）框架的低周期反复试验数据,采用地震工程开源模拟软件OpenSees对其进行有限元模拟,对比骨架曲线与滞回曲线,试验结果与有限元结果吻合较好。随后考察弯矩放大系数（Mc/Mb=0.86、1.48、2.04）、柱轴压比（n=0.06、0.2、0.3、0.6、0.8）对抗震性能的影响,得到了各参数下框架的滞回曲线、骨架曲线和各特征阶段的荷载与位移值。分析了框架的破化过程、延性与强度退化。结果表明：RCS组合框架滞回曲线饱满,具有良好的变形及耗能能力;随着弯矩放大系数的减小、柱轴压比的增大,框架的水平极限承载力降低、屈服状态提前、位移延性降低。分析结果可供有关研究或工程应用参考。  相似文献   

A climatic dataset of ocean vertical turbulent mixing coefficient based on real energy sources     

Yu Zhang  YiHua Lin  RuiXin Huang 《中国科学:地球科学(英文版)》2014,57(10):2435-2446

Using data on wind stress, significant height of combined wind waves and swell, potential temperature, salinity and seawater velocity, as well as objectively-analyzed in situ temperature and salinity, we established a global ocean dataset of calculated wind- and tide-induced vertical turbulent mixing coefficients. We then examined energy conservation of ocean vertical mixing from the point of view of ocean wind energy inputs, gravitational potential energy change due to mixing (with and without artificially limiting themixing coefficient), and K-theory vertical turbulent parameterization schemes regardless of energy inputs. Our research showed that calculating the mixing coefficient with average data and artificial limiting the mixing coefficient can cause a remarkable lack of energy conservation, with energy losses of up to 90% and changes in the energy oscillation period. The data also show that wind can introduce a huge amount of energy into the upper layers of the Southern Ocean, and that tidesdo so in regions around underwater mountains. We argue that it is necessary to take wind and tidal energy inputs into account forlong-term ocean climate numerical simulations. We believe that using this ocean vertical turbulent mixing coefficient climatic dataset is a fast and efficient method to maintain the ocean energy balance in ocean modeling research.  相似文献   

Effect of Compaction Degree on Solidification Characteristics of Pb‐Contaminated Soil Treated by Cement          下载免费PDF全文

Qiang Xue  Jiang‐shan Li  Lei Liu 《洁净——土壤、空气、水》2014,42(8):1126-1132

  相似文献